Installation guide

S
UMMIT
S
WITCH
H
ARDWARE
I
NSTALLATION
G
UIDE
2-3
I
NSTALLING THE
S
UMMIT
S
WITCH
Figure 2-1:
Rack-mount helper bracket
2
Place the switch the right way up on a hard flat surface, with the front facing you.
3
Remove the existing screws from the sides of the chassis and retain for Step 5.
4
Locate a mounting bracket over the mounting holes on one side of the unit.
5
Insert the screws and fully tighten with a suitable screwdriver, as shown in
Figure 2-2.
BDbrackt