User guide

38 Summit24e3 Switch Installation and User Guide
ExtremeWare Overview
Software Factory Defaults
Table 7 shows factory defaults for Summit24e3 ExtremeWare features.
NOTE
For default settings of individual ExtremeWare features, see the applicable individual chapters in this
guide.
Table 7: ExtremeWare Summit24e3 Factory Defaults
Item Default Setting
Serial or Telnet user account admin with no password and user with no password
Telnet Enabled
SSH2 Disabled
SNMP Enabled
SNMP read community string public
SNMP write community string private
RMON Disabled
BOOTP Enabled on the default VLAN (default)
QoS All traffic is part of the default queue
802.1p priority Recognition enabled
802.3x flow control Enabled on Gigabit Ethernet ports
Virtual LANs Two VLANs predefined. VLAN named default contains all
ports and belongs to the STPD named s0.
802.1Q tagging All packets are untagged on the default VLAN (default).
Spanning Tree Protocol Disabled for the switch; enabled for each port in the STPD.
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
RIP Disabled
OSPF Disabled
IP multicast routing Disabled
IGMP Enabled
IGMP snooping Enabled
NTP Disabled
DNS Disabled
EAPS Disabled
NAT Disabled
Network Login Disabled
RADIUS Disabled
TACACS+ Disabled
Port Mirroring Disabled