User guide

RIP Configuration Example
Summit24e3 Switch Installation and User Guide 195
RIP Configuration Example
Figure 33 illustrates a switch that has two VLANs defined as follows:
Finance
Contains ports 2 and 4
IP address 192.207.35.1.
Personnel
Contains ports 3 and 5
IP address 192.207.36.1.
Figure 33: RIP configuration example
In this configuration, all IP traffic from stations connected to ports 2 and 4 have access to the router by
way of the VLAN Finance. Ports 3 and 5 reach the router by way of the VLAN Personnel.
The example in Figure 33 is configured as follows:
create vlan Finance
create vlan Personnel
config Finance add port 2,4
config Personnel add port 3,5
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
EW_090
2
Finance Personnel
3 4 5
192.207.36.0192.207.35.0
192.207.36.14
192.207.35.13
192.207.35.11
192.207.36.12
192.207.36.1192.207.35.1