User guide

Summit24e3 Switch Installation and User Guide 13
Figures
1 Summit24e3 switch front view 20
2 Summit24e3 switch rear view 21
3 Fitting the mounting bracket 26
4 Null-modem cable pin-outs 28
5 PC-AT serial null-modem cable pin-outs 28
6 Mini-GBIC modules 31
7 Example of a port-based VLAN on the Summit24e3 switch 80
8 Single port-based VLAN spanning two switches 81
9 Two port-based VLANs spanning two switches 81
10 Physical diagram of tagged and untagged traffic 83
11 Logical diagram of tagged and untagged traffic 83
12 Permit-established access list example topology 100
13 Access control list denies all TCP and UDP traffic 101
14 Access list allows TCP traffic 102
15 Host A initiates a TCP session to host B 102
16 Permit-established access list filters out SYN packet to destination 103
17 ICMP packets are filtered out 103
18 RIP access policy example 106
19 OSPF access policy example 108
20 NAT Overview 111
21 Gigabit Ethernet fiber EAPS MAN ring 120
22 EAPS operation 121
23 EAPS fault detection and protection switching 122
24 Ethernet packet encapsulation 138
25 IP packet header encapsulation 140
26 Multiple Spanning Tree Domains 161
27 Tag-based STP configuration 162
28 Routing between VLANs 168
29 Unicast routing configuration example 177
30 Virtual link using Area 1 as a transit area 189
31 Virtual link providing redundancy 190
32 Route re-distribution 191
33 RIP configuration example 195