User guide

S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
10-13
R
ESETTING AND
D
ISABLING
RIP
R
ESETTING AND
D
ISABLING
RIP
To return RIP settings to their defaults, or to disable RIP, use the commands listed in
Table 10-3.
Table 10-3:
RIP Reset and Disable Commands
Command Description
config rip delete [vlan <name> | all] Disables RIP on an IP interface. When RIP is
disabled on the interface, the parameters are not
reset to their defaults.
disable rip Disables RIP.
disable rip aggregation Disables the RIP aggregation of subnet
information on a RIP version 2 interface.
disable rip splithorizon Disables split horizon.
disable rip poisonreverse Disables poison reverse.
disable rip triggerupdate Disables triggered updates.
disable rip exportstatic Disables the filtering of static routes.
unconfig rip {vlan <name> | all} Resets all RIP parameters to the default VLAN.
Does not change the enable/disable state of the
RIP settings.
Summit.bk : 10PROT.FM Page 13 Thursday, June 18, 1998 9:27 AM