User guide

5-18 S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
V
IRTUAL
LAN
S
(VLAN
S
)
• Tagged/untagged status for each port
• How the ports were added to the VLAN (manually or by GVRP)
To display protocol information, use the following command:
show protocol {<protocol> | all}
This
show
command displays protocol information, including the following:
• Protocol name
• List of protocol fields
• VLANs that use the protocol
D
ELETING
VLAN
S
To delete a VLAN, or to return VLAN settings to their defaults, use the commands
listed in Table 5-3.
Table 5-3:
VLAN Delete and Reset Commands
Command Description
disable ignore-stp vlan <name> Allows a VLAN to use STP port information.
unconfig vlan <name> ipaddress Resets the IP address of the VLAN.
delete vlan <name> Removes a VLAN.
delete protocol <protocol> Removes a protocol.
Summit.bk : 5VLAN.FM Page 18 Thursday, June 18, 1998 9:27 AM