User guide

S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
5-17
D
ISPLAYING
VLAN S
ETTINGS
D
ISPLAYING
VLAN S
ETTINGS
To display VLAN settings, use the following command:
show vlan {<name> | all}
Sample output from this command is as follows:
show vlan all
VLAN Interface [1-fde] with name “net142” created by user
Tagging: Untagged (Internal tag 4095)
IP: Not configured
STPD: Domain “s0” is running spanning tree protocol.
Protocol AppleTalk = SNAP:809b SNAP:80f3
QoS Profile: QP1
Ports: 4. (Number of active port=4)
Untag: 1 2 3 10
LAN Interface [2-fdd] with name “net123” created by user
Tagging: 802.1Q Tag 1054
IP: 123.45.67.1/255.0.0.0
STPD: Domain “s0” is running spanning tree protocol.
Protocol Match all unfiltered protocols.
QoS Profile: QP1
Ports: 18. (Number of active port=6)
Untag: 1 2 3 458910
Tagged: 6 7 11 12 13 14 15 16 17 18
The
show
command displays summary information about each VLAN, and includes
the following:
• Name
• VLANid
• How the VLAN was created (manually or by GVRP)
• IP address
• STPD information
• Protocol information
• QOS profile information
• Ports assigned
Summit.bk : 5VLAN.FM Page 17 Thursday, June 18, 1998 9:27 AM