Installation guide

Building a SummitStack Configuration
Summit Family Switches Hardware Installation Guide
71
Figure 44: SummitStack Cable Connections Using Four Summit Switches
Connecting a Stacking Cable to a Stacking Port
To connect a Summit stacking cable:
1 Align the cable connector with the stacking port connector on the back of the first switch (Figure 45).
2 Firmly press the cable connector into place on the mating stacking port connector.
3 Align and tighten the retaining screws on the cable connector.
Repeat steps 1 through 3 to connect the cable to the second switch.
Table 16: Recommended Stacking Port Connections (4-Switch Stack)
Slot
Number
Connect Stack Port 1 on
this switch to . . .
Connect Stack Port 2 on
this switch to . . .
1 Slot 4 Port 2 Slot 2 Port 1
2 Slot 1 Port 2 Slot 3 Port 1
3 Slot 2 Port 2 Slot 4 Port 1
4 Slot 3 Port 2 Slot 1 Port 1
BD_164A