Installation guide

Site Preparation

Summit Family Switches Hardware Installation Guide

UPS Transition Time

Transition time is the time that is necessary for the UPS to transfer from utility power to full-load

battery power. For Extreme Networks products, a transition time of less than 20 milliseconds is

required for optimum performance.

Applicable Industry Standards

For more information, see the following ANSI/TIA/EIA standards:

● ANSI/TIA/EIA-568-A—discusses the six subsystems of a structured cabling system.

● ANSI/TIA/EIA-569-A—discusses design considerations.

● ANSI/TIA/EIA-606—discusses cabling system administration.

● ANSI/TIA/EIA-607—discusses commercial building grounding and bonding requirements.

You can access these standards at:

http://www.ansi.org

http://www.tiaonline.org