Installation guide

Summit Family of Switches
Summit Family Switches Hardware Installation Guide
40
Figure 33: Summit X450e-24p Switch Front Panel
The rear panel of the Summit X450e-24p switch (Figure 34) includes:
● Slot for one of the following Summit option cards:
■ Summit XGM2-2xn option card, which allows you to add up to two 10-Gigabit XENPAK
modules
■ Summit XGM2-2xf option card, which allows you to add up to two 10-Gigabit XFP modules
For information about these Summit option cards, see “Summit XGM2-2xn Option Card” on
page 106 or “Summit XGM2-2xf Option Card” on page 108.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to an external redundant power supply
with full PoE power support, either the EPS-LD External Power Supply Unit (Model 45019) or the
EPS-500 External Power Supply (Model 10911). (See “EPS-LD External Power Supply Unit” on
page 47 or “EPS-500 External Power Supply Unit” on page 47 for more information). The connecting
redundant power supply cable is shipped with the power supply.
● AC power input socket
The power supply operates from 100 VAC to 240 VAC.
Figure 34: Summit X450e-24p Switch Rear Panel
STACK NO.
PORTS 1 -24
POWERED (AMBER) ON=LINK
NO POWER (GREEN) ON=LINK
FLASHING=ACTIVITY
OFF=NO LINK/DISABLED
ALTERNATE AMBER/GREEN=PWR FAULT
FLASHING=ACTIVITY
OFF=NO LINK/DISABLED
MGMT
FAN
PSU-1
PSU-E
1
10G
Stack
2
1
2
214365871091211 1413 1615 1817 2019 2221 2423 22X21X 24X23X
Shared Ports
SH_015B
10/100/1000 Mbps PoE ports
Console
port
Combination ports
Stack number
indicator
SH_027
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
Power socket
External power
supply connection