Installation guide

Summit X450 Series, X450a Series, and X450e Series Switches
Summit Family Switches Hardware Installation Guide
35
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to an external redundant power supply,
either the EPS-LD External Power Supply Unit (Model No. 45019) or the EPS-500 External Power
Supply (Model 10911). The connecting redundant power supply cable is shipped with the EPS-LD.
For more information about the external power supplies, see “EPS-LD External Power Supply Unit”
on page 47 or “EPS-500 External Power Supply Unit” on page 47.
● AC power input socket
The power supply operates from 100 VAC to 240 VAC.
Figure 26: Summit X450a-24x Switch Rear Panel
Summit X450a-24xDC Switch
The front panel of the Summit X450a-24xDC switch (Figure 27) includes:
● Twenty fixed autosensing 1000BASE-X ports (ports 1-20) that provide 20 Gbps of high-density fiber
(SFP) connectivity
● Four combination ports (ports 21-24). using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 43.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 27: Summit X450a-24xDC Switch Front Panel
SH_031
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
Power socket
External power
supply connection
STACK NO.
Solid ON = Link
Blinking = Activity
10G
MGMT
FAN
PSU-1
PSU-E
1
2
Stack
1
2
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
22X
21X
24X
23X
SH_034A
1000BASE-X ports
Shared ports
Console
Stack number
indicator
port