Installation guide
Summit Family of Switches
Summit Family Switches Hardware Installation Guide
30
Figure 18: Summit X450-24t Switch Rear Panel
Summit X450-24x Switch
The front panel of the Summit X450-24x switch (Figure 19) includes:
● Twenty fixed SFP ports (ports 5-24) that provide 20 Gbps of high-density fiber connectivity
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or
fiber connectivity
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 43.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 19: Summit X450-24x Switch Front Panel
The rear panel of the Summit X450-24x switch (Figure 20) includes:
● Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-Gigabit XENPAK
modules
For information about the Summit XGM-2xn option card, see
“Summit XGM-2xn Option Card” on
page 104
.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
S450_003A
10 Gigabit
uplink option
Management port
10 Gigabit
stacking ports
Power socket
External power
supply connection
STACK NO.
Band On = Link
Blinking = Activity
Shared Ports
S450_001D
10/100/1000 Mbps ports
Console
port
Mini-GBIC ports
Combination ports
Stack number
indicator