Installation guide

Summit X450 Series, X450a Series, and X450e Series Switches
Summit Family Switches Hardware Installation Guide
29
Summit X450-24t Switch
The front panel of the Summit X450-24t switch (Figure 17) includes:
● Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 5-24) that provide 20 Gbps of
high-density copper connectivity
● Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or
fiber connectivity
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 43.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 17: Summit X450-24t Switch Front Panel
The rear panel of the Summit X450-24t switch (Figure 18) includes:
● Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-Gigabit XENPAK
modules
For information about the Summit XGM-2xn option card, see “Summit XGM-2xn Option Card” on
page 104.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module
(Model No. 10907). (See “EPS-160 External Power Module (with EPS-T)” on page 46 for more
information.) The connecting redundant power supply cable is shipped with the EPS-160.
● AC power input socket
The power supply operates from 100 VAC to 240 VAC.
Shared Ports
STACK NO.
Band On = Link
Blinking = Activity
S450_002D
10/100/1000 Mbps portsMini-GBIC ports
Combination ports
Console
port
Stack number
indicator