Installation guide

Summit Family of Switches
Summit Family Switches Hardware Installation Guide
22
Figure 10: Summit X250e-24p Switch Rear Panel
Summit X250e-24x Switch
The front panel of the Summit X250e-24x switch (Figure 7) includes:
● Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber connectivity
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X250e Series Switch LEDs” on page 26.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 11: Summit X250e-24x Switch Front Panel
The rear panel of the Summit X250e-24x switch (Figure 8) includes:
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for use with the EPS-160 External Power Module. (See “EPS-160
External Power Module (with EPS-T)” on page 46 for more information.) The connecting redundant
power supply cable is shipped with the EPS-500 unit.
● AC power input socket
10 Gigabit
stacking ports
Management port
Power socket
External power
supply connection
SH_041
SH_056A
100BASE-X ports
Combination ports
Console
port
Stack number
indicator