Installation guide

Summit X250e Series Switches
Summit Family Switches Hardware Installation Guide
21
Figure 8: Summit X250e-24t Switch Rear Panel
Summit X250e-24p Switch
The front panel of the Summit X250e-24p switch (Figure 9) includes:
● Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 2.4 Gbps of
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X250e Series Switch LEDs” on page 26.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 9: Summit X250e-24p Switch Front Panel
The rear panel of the Summit X250e-24p switch (Figure 10) includes:
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
10911) with full PoE power support. (See “EPS-500 External Power Supply Unit” on page 47 for
more information.) The connecting redundant power supply cable is shipped with the EPS-500 unit.
● AC power input socket
SH_039
Redundant Power Input
! See Manual
10 Gigabit
stacking ports
Management port
Power socket
External power
supply connection
1
2
Stack
SH_040B
10/100 Mbps ports
Console
port
Combination portsStack number indicator