Installation guide

Summit Family of Switches
Summit Family Switches Hardware Installation Guide
20
NOTE
The Summit X250e-48p-TAA switch is compliant with the Trade Agreements Act (TAA). Functionally, it is
completely equivalent to the Summit X250e-48p switch. In the descriptions that follow, references to the Summit
X250e-48p switch also apply to the Summit X250e-48p-TAA switch.
Summit X250e-24t Switch
The front panel of the Summit X250e-24t switch (Figure 7) includes:
● Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
high-density copper connectivity
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X250e Series Switch LEDs” on page 26.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 7: Summit X250e-24t Switch Front Panel
The rear panel of the Summit X250e-24t switch (Figure 8) includes:
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module.
(See “EPS-160 External Power Module (with EPS-T)” on page 46 for more information.) The
connecting redundant power supply cable is shipped with the EPS-500 unit.
● AC power input socket
1
2
Stack
SH_038B
10/100 Mbps ports
Console
port
Combination portsStack number indicator