Installation guide

Summit X150 Series Switches
Summit Family Switches Hardware Installation Guide
17
● Redundant power input connector for use optional connection to the EPS-500 External Power Supply
(Model No. 10911) with full PoE power support. (See “EPS-500 External Power Supply Unit” on
page 325 for more information.) The connecting redundant power supply cable is shipped with the
EPS-500 unit.
● AC power input socket
Figure 4: Summit X150-24p Switch Rear Panel
Summit X150-48t Switch
The front panel of the Summit X150-48t switch (Figure 5) includes:
● Forty-eight fixed autosensing 10/100BASE-T ports (ports 1–48) that provide 4.8 Gbps of high-density
copper connectivity
● Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X150 Series Switch LEDs” on page 18.
● Serial console port used to connect a terminal and perform local management.
Figure 5: Summit X150-48t Switch Front Panel
The rear panel of the Summit X150-48t switch (Figure 6) includes:
● Management port with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module.
(See “EPS-500 External Power Supply Unit” on page 325 for more information.) The connecting
redundant power supply cable is shipped with the EPS-500 unit.
Management port
Power socket
External power
supply connection
SH_053
SH_054A
10/100 Mbps ports Console
port
Combination ports