Installation guide

Summit Family of Switches
Summit Family Switches Hardware Installation Guide
16
The rear panel of the Summit X150-24t switch (Figure 2) includes:
● Ethernet management port with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module.
(See “EPS-500 External Power Supply Unit” on page 325 for more information). The connecting
redundant power supply cable is shipped with the EPS-500 unit.
● AC power input socket
Figure 2: Summit X150-24t Switch Rear Panel
Summit X150-24p Switch
The front panel of the Summit X150-24p switch (Figure 3) includes:
● Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 4 Gbps of
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see “Summit X150 Series Switch LEDs” on page 18.
● Serial console port used to connect a terminal and perform local management.
Figure 3: Summit X150-24p Switch Front Panel
The rear panel of the Summit X150-24p switch includes:
● Ethernet management port with associated LEDs
SH_051
Management port
Power socket
External power
supply connection
SH_052A
10/100 Mbps ports
Console
port
Combination ports