Installation Guide
Table Of Contents
- Extreme SLX 9850-4 Router Hardware Installation Guide
- Preface
- About this Document
- Device Overview
- Preparing for the Installation
- Mounting the Device
- Initial Setup and Verification
- Initial setup and configuration checklist
- Items required
- Providing power to the device
- Establishing a serial connection
- Configuring a static IP address
- Establishing an Ethernet connection
- Customizing the chassis and host names
- Configuring the DNS service
- Setting the date and time
- Verifying correct operation
- Backing up the configuration
- Powering down the device
- Installing cable management kit
- Monitoring the Device
- Management Modules
- Interface Modules
- Power Supply Modules
- Power supply module overview
- Precautions specific to the power supply module
- Time and items required for removal and replacement
- Removing an AC power supply module
- Inserting an AC power supply module
- Removing a DC power supply module
- Inserting a DC power supply module
- Verifying power supply module operation
- High Voltage Power Supply Unit supporting AC and DC Voltages
- Fan Modules
- Switch Fabric Modules
- Transceivers and cables
- Supported transceivers and cables
- Time and items required
- Precautions specific to transceivers and cables
- Cleaning the fiber-optic connectors
- Managing cables
- Installing an SFP+ transceiver
- Replacing an SFP+ transceiver
- Installing a QSFP28 transceiver
- Replacing a QSFP28 transceiver
- Breakout cables
- Verifying transceiver operation
- Hardware Maintenance Schedule
- Brocade SLX 9850 Router Technical Specifications
- System specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Environmental requirements
- Power supply specifications (per PSU)
- Power consumption (typical configuration)
- Power consumption (maximum configuration)
- Power consumption (modules) (typical configuration)
- Power consumption (modules) (maximum configuration)
- Data port specifications (Ethernet)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
- Regulatory Statements
- Cautions and Danger Notices
TABLE 9 Brocade SLX 9850-4 fan module
Part number Long description Introduced OS Currently supported
XBR-SLX9850-4-FANM Brocade SLX 9850-4 fan module for 4-slot
chassis. Fan module has 2 fans.
SLX-OS 16r.1.00 Yes
TABLE 10 Brocade SLX 9850-4 NEBS kit and spare air lter
Part number Long description
XBR-SLX9850-4-NEBS-KIT Brocade SLX 9850 Network Equipment-Building System (NEBS) kit for 4-slot chassis. Includes air lter door,
air lter, and cable management kit
XBR-SLX9850-4-FLTR Brocade SLX 9850 air lter for 4-slot chassis
TABLE 11 Brocade SLX 9850-4 rack mount kits
Part number Long description
XBR-SLX9850-4-4PRM-KIT Brocade SLX 9850 four-post rack mounting kit for 4-slot chassis. Includes options for 68.6-78.7 cm (27-31
in.) ush and recessed mounting
XBR-SLX9850-4-2PRM-KIT Brocade SLX 9850 two-post rack mounting kit for 4-slot chassis. Includes Telco ush and midplane mounting
TABLE 12 Brocade SLX 9850-4 cable management kit
Part number Long description
XBR-SLX9850-4-CAB Brocade SLX 9850 Cable Management kit (included in the chassis)
What is new in this document
On October 30, 2017, Extreme Networks, Inc. acquired the SLX-OS product line from Brocade Communications Systems, Inc. This
transitional release includes references to both companies.
What is new in this document
Extreme SLX 9850-4 Router Hardware Installation Guide
53-1004399-07 15