Installation Guide
Table Of Contents
- ExtremeRouting SLX 9850-4 Hardware Installation Guide
- Preface
- About this Document
- Device Overview
- Preparing for the Installation
- Mounting the Device
- Initial Setup and Verification
- Initial setup and configuration checklist
- Items required
- Providing power to the device
- Establishing a serial connection
- Configuring a static IP address
- Establishing an Ethernet connection
- Customizing the chassis and host names
- Configuring the DNS service
- Setting the date and time
- Verifying correct operation
- Backing up the configuration
- Powering down the device
- Installing cable management kit
- Monitoring the Device
- Management Modules
- Interface Modules
- Power Supply Modules
- Power supply module overview
- Precautions specific to the power supply module
- Time and items required for removal and replacement
- Removing an AC power supply module
- Inserting an AC power supply module
- Removing a DC power supply module
- Inserting a DC power supply module
- Verifying power supply module operation
- High Voltage Power Supply Unit supporting AC and DC Voltages
- Fan Modules
- Switch Fabric Modules
- Transceivers and cables
- Supported transceivers and cables
- Time and items required
- Precautions specific to transceivers and cables
- Cleaning the fiber-optic connectors
- Managing cables
- Installing an SFP+ transceiver
- Replacing an SFP+ transceiver
- Installing a QSFP28 transceiver
- Replacing a QSFP28 transceiver
- Breakout cables
- Verifying transceiver operation
- Hardware Maintenance Schedule
- ExtremeRouting SLX 9850 Technical Specifications
- System specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Environmental requirements
- Power supply specifications (per PSU)
- Power consumption (typical configuration)
- Power consumption (maximum configuration)
- Power consumption (modules) (typical configuration)
- Power consumption (modules) (maximum configuration)
- Data port specifications (Ethernet)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
- Regulatory Statements
- Cautions and Danger Notices
Model name Power used in watts Minimum number of power
supplies
Notes
SLX 9850-8 11492 4 200 VAC amps, watts, and BTU/hr
are calculated with 0.98 power
factor and 4 PSUs
Power consumption (modules) (typical conguration)
NOTE
Typical conguration is 50% trac with fans operating normally. Ambient temperature 25 deg
C.
Module Typical power consumption
Management Module 97 W
Switch Fabric Module SLX 9850-4: 102 W
SLX 9850-8: 200 W
Fan module SLX 9850-4: 175 W
SLX 9850-8: 346W
72-port 10GbE/1GbE interface module 250 W
36-port 100GbE, 60-port 40GbE, or 240-port
10GbE ex-speed interface module
617 W
Power consumption (modules) (maximum
conguration)
NOTE
Maximum conguration is 100% trac with fans operating normally. Ambient temperature 40 deg
C.
Module Maximum power consumption
Management Module 100W
Switch Fabric Module SLX 9850-4: 124 W
SLX 9850-8: 220 W
Fan module SLX 9850-4: 175 W
SLX 9850-8: 346 W
72-port 10GbE/1GbE interface module 299 W
36-port 100GbE, 60-port 40GbE, or 240-port
10GbE ex-speed interface module
848 W
Power consumption (modules) (typical conguration)
ExtremeRouting SLX 9850-4 Hardware Installation Guide
142 9035331-02