Installation Guide
Table Of Contents
- ExtremeRouting SLX 9850-8 Hardware Installation Guide
- Preface
- About this Document
- Device Overview
- Preparing for the Installation
- Mounting the Device
- Initial Setup and Verification
- Initial setup and configuration checklist
- Items required
- Providing power to the device
- Establishing a serial connection
- Configuring a static IP address
- Establishing an Ethernet connection
- Customizing the chassis and host names
- Configuring the DNS service
- Setting the date and time
- Verifying correct operation
- Backing up the configuration
- Powering down the device
- Installing cable management kit
- Monitoring the Device
- Management Modules
- Interface Modules
- Power Supply Modules
- Power supply module overview
- Precautions specific to the power supply module
- Time and items required for removal and replacement
- Removing an AC power supply module
- Inserting an AC power supply module
- Removing a DC power supply module
- Inserting a DC power supply module
- Verifying power supply module operation
- High Voltage Power Supply Unit supporting AC and DC Voltages
- Fan Modules
- Switch Fabric Modules
- Transceivers and cables
- Supported transceivers and cables
- Time and items required
- Precautions specific to transceivers and cables
- Cleaning the fiber-optic connectors
- Managing cables
- Installing an SFP+ transceiver
- Replacing an SFP+ transceiver
- Installing a QSFP28 transceiver
- Replacing a QSFP28 transceiver
- Breakout cables
- Verifying transceiver operation
- Hardware Maintenance Schedule
- ExtremeRouting SLX 9850 Technical Specifications
- System specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Environmental requirements
- Power supply specifications (per PSU)
- Power consumption (typical configuration)
- Power consumption (maximum configuration)
- Power consumption (modules) (typical configuration)
- Power consumption (modules) (maximum configuration)
- Data port specifications (Ethernet)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
- Regulatory Statements
- Cautions and Danger Notices
TABLE 8 Supported transceivers and cables (continued)
Interface module Transceiver type and description Introduced OS Currently supported
100G-QSFP28-LR4-LP-10KM - 100 GbE QSFP28
optic (LC), LR4 low power, for distances up to 10 km over
SMF
SLX-OS 16r.1.00 Yes
40G-QSFP-SR4 - 40GBASE-SR4 QSFP+ optic (MTP
1x8 or 1x12), 100m over MMF, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-SR4 - 40GBASE-SR4 QSFP+ optic (MTP
1x8 or 1x12), 100m over MMF, compatible with
10GBASE-SR, 10G breakout-capable, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-ESR4 - 40GBASE-SR4 QSFP+ optic (MTP
1x8 or 1x12), 300m over MMF, compatible with
10GBASE-SR, 10G breakout-capable, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-LR4 - 40GBase-LR4 QSFP+ optic (LC), for
up to 10km over SMF, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-QSFP-C-0101 - 40GE Direct Attached
QSFP+ to QSFP+ Active Copper cable, 1m, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-QSFP-C-0301 - 40GE Direct Attached
QSFP+ to QSFP+ Active Copper cable, 3m, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-QSFP-C-0501 - 40GE Direct Attached
QSFP+ to QSFP+ Active Copper cable, 5m, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-QSFP-AOC-1001 - 40GE Direct Attached
QSFP+ to QSFP+ Active Optical Cable, 10m, 1-pack
SLX-OS 16r.1.00 Yes
40G-QSFP-QSFP-C-0101 - 4x10GE Direct Attached
QSFP+ to 4 SFP+ Active Copper Breakout Cable, 1m, 1-
pack
SLX-OS 16r.1.00 Yes
40G-QSFP-4SFP-C-0301 - 4x10GE Direct Attached
QSFP+ to 4 SFP+ Active Copper Breakout Cable, 3m, 1-
pack
SLX-OS 16r.1.00 Yes
40G-QSFP-4SFP-C-0501 - 4x10GE Direct Attached
QSFP+ to 4 SFP+ Active Copper Breakout Cable, 5m, 1-
pack
SLX-OS 16r.1.00 Yes
40G-QSFP-4SFP-AOC-1001 - 4x10GE Direct Attached
QSFP+ to 4 SFP+ Active Optical Breakout Cable, 10m, 1-
pack
SLX-OS 16r.1.00 Yes
BR-SLX9850-10Gx72S-M
(72-port 10GbE/1GbE)
interface module
10G-SFPP-USR - 10GE USR SFP+ optic (LC), target
range 100m over MMF, 1-pack
SLX-OS 16r.1.00 Yes
10G-SFPP-SR - 10GBASE-SR, SFP+ optic (LC), target
range 300m over MMF
SLX-OS 16r.1.00 Yes
10G-SFPP-SR-8 - 10GBASE-SR, SFPP MMF LC
CONNECTOR 8-PACK
SLX-OS 16r.1.00 Yes
10G-SFPP-LR - 10GBASE-LR, SFP+ optic (LC), for up to
10km over SMF
SLX-OS 16r.1.00 Yes
10G-SFPP-LR-8 - 10GBASE-LR,SFPP SMF LC
CONNECTOR 8-PACK
SLX-OS 16r.1.00 Yes
10G-SFPP-ER - 10GBASE-ER SFP+ optic (LC), for up to
40km over SMF
SLX-OS 16r.1.00 Yes
10G-SFPP-TWX-0101 - DIRECT ATTACHED SFPP
ACTIVE COPPER,1M,1-PACK
SLX-OS 16r.1.01 Yes
10G-SFPP-TWX-0108 - DIRECT ATTACHED SFPP
COPPER,1M,8-PACK
SLX-OS 16r.1.01 Yes
Supported hardware and software
ExtremeRouting SLX 9850-8 Hardware Installation Guide
14 9035475-02 Rev AA