Installation Guide
Table Of Contents
- Brocade SLX 9850-8 Router Hardware Installation Guide
- Preface
- About this Document
- Device Overview
- Preparing for the Installation
- Mounting the Device
- Initial Setup and Verification
- Initial setup and configuration checklist
- Items required
- Providing power to the device
- Establishing a serial connection
- Configuring a static IP address
- Establishing an Ethernet connection
- Customizing the chassis and host names
- Configuring the DNS service
- Setting the date and time
- Verifying correct operation
- Backing up the configuration
- Powering down the device
- Installing cable management kit
- Monitoring the Device
- Management Modules
- Interface Modules
- Power Supply Modules
- Power supply module overview
- Precautions specific to the power supply module
- Time and items required for removal and replacement
- Removing an AC power supply module
- Inserting an AC power supply module
- Removing a DC power supply module
- Inserting a DC power supply module
- Verifying power supply module operation
- High Voltage Power Supply Unit supporting AC and DC Voltages
- Fan Modules
- Switch Fabric Modules
- Transceivers and cables
- Supported transceivers and cables
- Time and items required
- Precautions specific to transceivers and cables
- Cleaning the fiber-optic connectors
- Managing cables
- Installing an SFP+ transceiver
- Replacing an SFP+ transceiver
- Installing a QSFP28 transceiver
- Replacing a QSFP28 transceiver
- Breakout cables
- Verifying transceiver operation
- Hardware Maintenance Schedule
- Brocade SLX 9850 Router Technical Specifications
- System specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Environmental requirements
- Power supply specifications (per PSU)
- Power consumption (typical configuration)
- Power consumption (maximum configuration)
- Power consumption (modules) (typical configuration)
- Power consumption (modules) (maximum configuration)
- Data port specifications (Ethernet)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
- Regulatory Statements
- Cautions and Danger Notices
TABLE 10 Brocade SLX 9850-8 NEBS kit and spare air lter
Part number Long description
XBR-SLX9850-8-NEBS-KIT Brocade SLX 9850 Network Equipment-Building System (NEBS) kit for 8-slot chassis. Includes air lter door,
air lter, and cable management kit
XBR-SLX9850-8-FLTR Brocade SLX 9850 air lter for 8-slot chassis
TABLE 11 Brocade SLX 9850-8 rack mount kits
Part number Long description
XBR-SLX9850-8-4PRM-KIT Brocade SLX 9850 four-post rack mounting kit for 8-slot chassis. Includes options for 68.6-78.7 cm (27-31
in.) ush and recessed mounting
XBR-SLX9850-8-2PRM-KIT Brocade SLX 9850 two-post rack mounting kit for 8-slot chassis. Includes Telco ush and midplane mounting
TABLE 12 Brocade SLX 9850-8 cable management kit
Part number Long description
XBR-SLX9850-8-CAB Brocade SLX 9850 Cable Management kit (included in the chassis)
What is new in this document
This is the rst release of this guide.
What is new in this document
Brocade SLX 9850-8 Router Hardware Installation Guide
53-1004400-05 15