Installation guide

About the Sentriant AG200 Appliance
Sentriant AG200 Hardware Installation Guide
8
Back Panel Features
Figure 2 shows the back panel of the Sentriant AG appliance.
Figure 2: Back Panel of the Sentriant AG Appliance
The back panel of the Sentriant AG appliance has the following features:
● AC power input connector
● Power switch
● Reset switch
LED Operation
The LCD panel on the Sentriant AG appliance includes two LEDs labeled Power and HDD. In addition,
each Ethernet port has an LED to indicate port activity. Table 3 describes the meanings of these LEDs.
Table 3: LED Meanings
LED Type Color State Meaning
Power Green Off Power is off.
On Power is on.
HDD Amber Flashing Disk activity
Activity (On
Ethernet port)
Green Steady No activity
Green Flashing Activity
Link (On
Ethernet port)
Green On Link detected
Off Link not detected
SN_002
Power switch
AC power
connector
Reset switch