Installation guide

Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
30
4 Follow the instructions in the Sentriant AG Installation Guide Upgrading from the Command Line.
5 If the server needs to reboot it will ask you to do that.
To upgrade from a system running 5.0-40103 to (but not including) 5.0-40110, perform the following steps:
 Command line window
1 Place the install CD in the filesystem that is NOT the generic
mnt area. See http://www.linux.com/base/
ldp/howto/CDROM-HOWTO/x289.html#AEN980 for more information on Linux
mnt.
2 Log in to the Sentriant AG MS as
root using SSH or directly using a keyboard.
3 Enter the following command at the command line:
setProperty.py -m Compliance.UpgradeManager.CDRomMountPoint=/mntl
4 From a different computer with browser software installed, log in to the Sentriant AG user interface.
5 Follow the instructions in the Sentriant AG Installation Guide Upgrading from the Sentriant AG User
Interface.
6 Enter the following command at the command line:
set Property.py -m Compliance.UpgradeManager.CDRomMountPoint=/mnt/cdrom
To upgrade from a system running 5.0-40110 or later perform the following steps:
 Command line window
1 Place the install CD in the filesystem where the generic
mnt area is defined. See http://www.linux.com/
base/ldp/howto/CDROM-HOWTO/x289.html#AEN980 for more information on Linux
mnt.
2 Log in to the Sentriant AG MS as
root using SSH or directly using a keyboard.
3 Enter the following commands at the command line:
mkdir /mnt/cdrom
mount /dev/cdrom /mnt/cdrom
4 From a different computer with browser software installed, log in to the Sentriant AG user interface.
5 Follow the instructions in the Sentriant AG Installation Guide Upgrading from the Sentriant AG User
Interface.
If you have questions or experience problems, contact Extreme Networks, Inc. Technical Assistance
Center (TAC) at [e-mail] or call [phone].