Installation guide

Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
29
b If an upgrade is available, click yes to upgrade your system.
CAUTION
Installation of an upgrade can take several hours to download all the software. You can continue to use Sentriant AG
during the download process. Sentriant AG will automatically shutdown and restart after the software downloads.
3 After the upgrade is complete, log back in to the Sentriant AG user interface navigate to the Te st
updates window (System configuration>> Test updates).
4 Click Check for test updates. This ensures that your tests are current.
5 Click ok.
Downloading the Upgrade ISO Image
After you download the ISO image, you must burn a CD (see “Creating the Installation CD from the
Sentriant AG Download” on page 2), and then perform the installation from the CD (see “Installing
Sentriant AG” on page 3).
To download the upgrade ISO:
The upgrade ISO and the new ISO are the same file. See “Downloading the New Install ISO Image” on
page 1.
Creating an upgrade CD from the download
To burn the upgrade ISO image to a CD:
Follow the process described in “Creating the Installation CD from the Sentriant AG Download” on
page 2.
Upgrading from a CD
To upgrade from a system running 4.x, perform the following steps:
 Command line window
1 Place the install CD in the filesystem that is NOT the generic
mnt area. See http://www.linux.com/base/
ldp/howto/CDROM-HOWTO/x289.html#AEN980 for more information on Linux
mnt.
2 Log in to the Sentriant AG MS as
root using SSH or directly using a keyboard.
3 Enter the following commands at the command line:
mkdir /mntl/cdrom
mount /dev/cdrom /mntl/cdrom