Installation guide

Installing Sentriant AG

Sentriant AG Software Installation Guide, Version 5.2

4 Click Add an Enforcement cluster. The Add an Enforcement cluster window appears, with the

General menu option selected by default.

5 In the Add Enforcement cluster window, General area, enter a name for the cluster in the Cluster

name field.

6 On the NAC policy set drop-down list, select Default.

7 Before Sentriant AG is fully functional, you must select the operating parameters for each cluster;

however, you do not have to do this now. When you are ready to configure the clusters, refer to the

“Adding a cluster” section in the Sentriant AG Users Guide.

8 Click ok to save the cluster and return to the System configuration window.

Adding an ES to a Cluster. To add an ES to a cluster:

 Home window>>System configuration

Figure 17: Add Enforcement Cluster Window