Installation guide

Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
19
NOTE
An internet connection is required to register/activate the license. The license key is registered to the server once the
activation is complete and cannot be moved to another machine without first contacting Technical Assistance Center
(TAC).
CAUTION
If you use a proxy server, your license key will not validate from this window unless you have performed step 7 on
page 17.
10 On the Create administrator account window, create the initial Sentriant AG administrator account.
(This is not the same as the server’s root account that you created in during installation.)
a Enter a User ID and Password. We suggest the password be at least eight characters with a mix
of numbers and letters.
b Click Finish.
11 The final step of creating the single-server installation is to configure the default Enforcement cluster.
See the Sentriant AG Users Guide for instructions on editing Enforcement clusters.
NOTE
In the case of a single-server installation, the MS and ES are on the same server and the ES is automatically joined
to a default Enforcement cluster. You can change the name of the Enforcement cluster from the user interface. See
the Sentriant AG Users Guide for instructions on editing Enforcement clusters.
Creating an Enforcement Cluster. When creating a multiple-server installation (the MS and ES are
installed on different servers), you must create the clusters before you join the ESs to the cluster.
To create (name) the Enforcement cluster:
1 Using
https://, point your browser to the IP address or host name of the Sentriant AG server (for
example,
https://10.0.64.25).
Figure 14: Create Administrator Account Window