Installation guide

Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
17
c Click Next. The Enter management server settings window appears.
5 The Date and time area is prepopulated with values entered during the initial installation process.
Change any of the following if necessary:
■ Region—Select a region from the drop-down list.
■ Time zone—Select a time zone from the drop-down list.
■ NTP servers—Enter one or more Network Time Protocol (NTP) servers, separated by commas.
The NTP protocol allows Sentriant AG to synchronize its date and time with other endpoints on
your network. For example,
time.nist.gov.
6 The Network settings area is prepopulated with values entered during the initial installation process.
Change any of the following if necessary:
■ Host name—Enter a Fully Qualified Domain Name (FQDN). For example,
crocus.mycompany.com.
■ DNS IP address—Enter one or more DNS resolver IP addresses, separated by commas,
semicolons, or spaces. For example,
10.0.16.100,10.0.1.1.
7 If you use a proxy server, configure it as follows:
a Select the Use a proxy server for Internet connections check box. Connecting to the Internet is
necessary for updating tests, validating license keys, and sending support packages.
b Enter the IP address of the server that will act as the proxy for Internet connections in the Proxy
server IP address text box.
Figure 12: Enter Management Server Settings Window