Installation guide
Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
8
4 Press [Enter]. The Installation Confirmation screen appears:.
5 On the Installation Confirmation screen, type
install and select OK. The Network Configuration
for eth0 screen appears.
NOTE
Use the [Tab], [spacebar], and [Enter] keys to navigate between fields and make selections on the install screens.
6 On the Network Configuration for eth0 screen, enter the IP address of the Sentriant AG MS/ES
installation, as shown in Figure 3. The Netmask value is prepopulated; edit the Netmask value if
necessary.
NOTE
You must use static IP addresses for Sentriant AG servers. Sentriant AG servers cannot receive DHCP IP addresses.
Figure 2: Install Screen, Installation Confirmation