Installation guide

Installing Sentriant AG
Sentriant AG Software Installation Guide, Version 5.2
2
4 A pop-up window appears instructing you to select a directory in which to save the file. Navigate to
a location that you will remember when it is time to create the install CD. Click Save.
5 The download window appears, showing the status of the download process. This download can
take a lot of time, depending on your connection speed.
6 After you download the file (ISO image), you need to create a CD (see “Creating the Installation CD
from the Sentriant AG Download” on page 2), and then you can use that CD to install the
Sentriant AG software (see “Installing Sentriant AG” on page 3).
NOTE
Downloading an ISO image file and creating an installation CD is not the same process as just copying a file to a
CD.
Creating the Installation CD from the Sentriant AG Download
NOTE
If you already have a Sentriant AG installation CD, go to “Installing Sentriant AG” on page 3.
You must have a CD to install Sentriant AG. This section describes how to create one from the
downloaded ISO image.
To create the Sentriant AG installation CD:
1 For Windows:
a Most current CD-burning software supports creating CDs from ISO images. Open the ISO file
with your CD-burning software. If it recognizes the ISO file, proceed with the CD-burning
process.
or
b Right-click on the ISO file and choose Open with>>Choose program and select your CD-burning
software. After your CD program launches, create the CD using the typical procedures.
NOTE
A Free CD-burning application you can try is CDBurnerXP Pro (http://www.cdburnerxp.se)
2 For Linux:
Most Linux systems include the
cdrecord command; however, cdrecord syntax varies depending
on the specific distribution. Consult your documentation for the correct syntax for your version.
For example:
cdrecord -v speed=8 dev=0,0,0 /tmp/imagefile.iso