Installation guide

Sentriant AG Software Installation Guide, Version 5.2
1
1 Installing Sentriant AG
You have two installation options:
● Install Sentriant AG for the first time (see “Installing Sentriant AG for the First Time”)
● Upgrade to a newer version of Sentriant AG (see “Upgrading Sentriant AG to a Newer Version” on
page 24)
Installing Sentriant AG for the First Time
For first-time installations, use the install CD. Create an install CD from an International Organization
for Standardization (ISO) image downloaded from the Extreme Networks, Inc. Web site. The installation
process loads both the Sentriant AG application and the custom, hardened operating system (OS) on
which Sentriant AG runs.
NOTE
If you already have a CD, skip to “Installing Sentriant AG” on page 3.
This section covers the following tasks:
● “Downloading the New Install ISO Image” on page 1
● “Creating the Installation CD from the Sentriant AG Download” on page 2
● “Installing Sentriant AG” on page 3
Downloading the New Install ISO Image
After you download the ISO image, create a CD (see “Creating the Installation CD from the
Sentriant AG Download” on page 2), and then perform the installation from the CD (see “Installing
Sentriant AG” on page 3).
To download the new install ISO using Internet Explorer:
 Internet Explorer (IE) or other browser
1 Locate a computer that has a browser installed and is connected to the Internet.
2 Open a browser window and navigate to the following URL:
http://download.sentriantag.extremenetworks.com/SentriantAG-current.iso
The approximate file size is 450 MB.
3 A pop-up window appears with instructions about saving the file, click Save.