Installation guide

System Requirements
Sentriant AG Software Installation Guide, Version 5.2
4
■ Enterasys
1H582-25 (software version 03.05.06)
■ Extreme
Extreme Network Switches running EXOS version 11.2.2.4 or later
■ Foundry
FastIron Edge 9604 (software version FES 3.5 and above)
FastIron Edge (FES) 4802 (software version FES 3.4 and above)
■ HP
● ProCurve 3400cl-24G (software version M.10.20)
● ProCurve 2650 (software version H.08.86)
● ProCurve 2824 (software version I.08.105)
● ProCurve 2900 (software version T.11.X1)
● ProCurve 3500yl (software version K.12.01)
● ProCurve 5340xl (software version E.10.52)
■ Nortel
● BayStack 5510—v4.2.0.002
● BayStack 5510—5530_423024.img (for 5510, 20, 30)
● BayStack 5510—5530_423025s.img (for 5510, 20, 30)
● BayStack 5510—5530_503004.img (for 5510, 20, 30)
● BayStack 5510—5530_503005s.img (for 5510, 20, 30)
NOTE
VMware is not supported.
Important Browser Settings
Pop-up Windows
The Sentriant AG reports capability uses a pop-up window. In order for you to run reports on
Sentriant AG, you must allow pop-up windows from the Sentriant AG server.
To allow pop-up windows in Internet Explorer:
 Internet Explorer browser>>Tools>>Pop-up blocker>>Pop-up blocker settings
1 Enter the IP address or partial IP address of the Sentriant AG MS.
2 Click Add.
3 Click Close.