Installation guide

Deployment Flexibility

Sentriant AG Software Installation Guide, Version 5.2

These DHCP settings effectively restrict all network access except to the IP addresses and networks

specified as static routes in the accessible endpoints and services area. A list of Web sites can also be

configured as accessible. You can access these Web sites through a proxy server, which is built into the

Sentriant AG ES. The Sentriant AG ES responds to DHCP INFO requests to automatically configure the

proxy server in the browser.

Once the endpoint is allowed access, the IP address is automatically renewed and the main DHCP

server assigns an IP address in the main LAN.

NOTE

When the MS and ES are installed on the same server (single-server Installation), that server’s position in the

network must be inline with your DHCP server. It is the ES that responds to the DHCP request and blocks the

request from getting to the main DHCP server.

NOTE

When using DHCP mode and connecting directly to the DHCP server's network interface, be sure to use a crossover

cable.