Specifications

Ridgeline Concepts and Solutions Guide
363
● You can specify each search domain option multiple times.
- Wildcards are not supported for device IP addresses. To include multiple devices in the search
domain, you can specify a device group that contains the devices, or specify multiple -dip
options.
- To restrict the search domain to one or more ports on a device, specify the
-port option
immediately after the
-dip option. If you place it anywhere else in the command, it will be taken as
the server port specification.
- You can specify individual devices, device groups, and port groups in a single command.
FindAddr Output
The output from the FindAddr command is displayed as tab-delimited text, one line per address. Each
line contains the following information:
● Both the MAC address and the corresponding IP address.
● The switch and port to which the address is connected.
● The user (name) currently logged in at that address, if applicable.
The output also tells you the total number of addresses found, and lists any switches in the search
domain that were unreachable.
FindAddr Examples
The following examples illustrate the usage of these commands.
● To display all addresses that can be accessed through devices in the Default device group, from the
local Ridgeline database (with default user, password and port), enter the following command:
FindAddr -user admin -all -dg Default
● To display all addresses that can be accessed through device 10.20.30.40, ports 5,6,7,8, in the
Ridgeline database running on server
snoopy on port 81, with Ridgeline login “master” and
password “king,” enter the following command:
FindAddr -host snoopy -port 81 -user master -password king -dip 10.20.30.40 -port
5,6,7,8 -all
Note that the second -port option immediately follows the -dip option. It must be placed in this
position to specify ports as the search domain.
● To search for MAC addresses beginning with 00-01-03, and write the results to the file “info.txt,”
with the Default device group as the search domain, enter the following command:
FindAddr -user admin -mac 00:01:03:*:*:* -dg Default -f info.txt
If the file does not already exist, it will be created, by default in the Ridgeline bin directory.
The TransferMgr Utility
The Transfer Manager utility (TransferMgr) allows you to upload configuration information from a
device to a file, and to download configuration information and ExtremeWare software images to
Extreme devices.