Specifications

Using Identity Management
Ridgeline Concepts and Solutions Guide
292
Displaying Identity Management Reports
Using information gathered from Identity Management records, Ridgeline can generate the following
reports:
● Most logons by user name
● Most logon failure by user name
● Most logons by device IP address
● Most logon failures by device IP address
● Most logon by user’s MAC address
● Most logon failures by user’s MAC address
● All logins, authorization failures, and logouts in the last 24 hours
To view reports, go to Network Administration>Reports>Network users and click on the individual
reports.
Figure 248: Ridgeline Reports
For additional information about reports, refer to Chapter 26 “Ridgeline Reports”.
Device IP address The IP address of the switch where the user connected to the network.
Port number The port number on the switch where the user connected to the network.
Port name The name of the port where the user connected to the network.
Last updated Date and time when information about the user was last received by Ridgeline.
Last attempt to update: The last time Ridgeline polled for information about the user, whether successful or
not.
Member of The device groups the user belongs to, if any.
LLDP capability The LLDP capability of the device user. This can be one of the following: Avaya
phone, General telephone, Router, Bridge, Repeater, WLAN access point, DOCSIS
cable service, Station only, or Other.
The window also includes the following information about the VLAN(s) that the user is part of.
VLAN Tag The VLAN tag value (if any) or “Untagged”
VLAN Name The VLAN name.
User’s IP address The IP address assigned to the user on the VLAN.