Specifications

11
Ridgeline Concepts and Solutions Guide
153
To use the wizard, do the following:
1 On the menu bar, open Edit and choose Edit List of VM Devices. The Edit List of Devices dialog box
opens. See Figure 106.
Figure 106: Select Device or Device Group
2 Select Devices or Device groups. If you select Devices, a window opens and asks “Monitor VMs on
which devices?” See Figure 107. It shows the switch names and their IP addresses. If you select
Device groups a window opens showing ports, device names and IP addresses. See Figure 108. The
following conditions show disabled devices when:
● You deselect a previously selected device, VM Tracking is disabled.
● The device is grayed out, it does not support VM Monitoring
● The device has Identity Management enabled.
● All the devices in the group belong to all the cases described, the group is disabled.
NOTE
Removing all ports on a switch disables tracking for the switch.