Specifications

Clarifications and Known Problems
Ridgeline Service Advisor Release Note 31
its subgroups at the same level, then changes the display to show only the ports in the top level group.
(PD3-40487688)
Reports
User Defined Reports link does not appear the first time Reports are invoked
When you display the Reports feature for the first time after installing Ridgeline SA 2.0, the User
Defined Reports link does not appear. Once you refresh the browser, the link appears and works
properly from then on. (PD3-106204511).
Internal power supplies reported as failed rather than powered off on Summit X250
or X450 devices
For Summit X250 or X450 devices with external power supplies connected, the “Devices in Marginal
Condition” report incorrectly showed the internal power supplies for these devices as failed power
supplies, instead of powered off. (PD4-700644264)
Telnet
Cannot edit ExtremeXOS Policy files in the Telnet window
The Ridgeline SA Telnet window does not support the editing of ExtremeXOS policy files. (PD3-
55109713)
VLAN Management
Cannot create a VLAN Network Name with the same name as a device/port group
It was not possible to create a VLAN Network Name that had the same name as an existing device or
port group, nor was it possible to create a device or port group with the same name as an existing
VLAN Network Name. (PD4-487584301)
Enabling “Show VLANs” in the Link Details window displayed incorrect information
In the Link Details window, enabling the Show VLANs box did not display correct VLAN information.
The VLAN information is displayed correctly in the VLAN tab. (PD4-699276059)