Specifications

Ridgeline SA 2.0 Device Support
Ridgeline Service Advisor Release Note 17
● SNMP must be enabled on the switch for Ridgeline SA to discover the device, and for Ridgeline SA
to manage the switch.
● If you use access profiles to control SNMP, Telnet and SSH access to your switches, you must ensure
that the Ridgeline SA host’s IP address is permitted in those access profiles.
Ridgeline SA 2.0 Device Support
With a Base 20 license, Ridgeline SA 2.0 supports up to 20 managed devices. If you want to manage
more devices, you can obtain additional 50-node and 250-node licenses from Extreme Networks. The
following sections list the devices supported by Ridgeline SA 2.0.
Extreme Networks Device Support
Ridgeline SA 2.0 supports the following Extreme Networks devices:
Table 3: Extreme Networks Devices Supported by Ridgeline SA 2.0
Switches/Modules
Summit switches:
Summit1i /1iSX Summit24e3 Summit 300-24 SummitPx1*
Summit5iTX/LX/SX Summit48i/48Si Summit 300-48 Summit WM 100/1000
Summit7iTX/SX Summit 200-24 Summit 400-24t Summit WM 20
Summit24e2T/2X* Summit 200-24fx Summit 400-24p Summit WM 3400/3600/
3700
Summit WM 200/
2000
Summit 200-48 Summit 400-48
Summit X150 series:
Summit X150-24t Summit X150-48t Summit X150-24p
Summit X250 series:
Summit X250-24tDC Summit X250-24xDC Summit X250-48tDC
Summit X250e series:
Summit X250e-24t Summit X250e-24p Summit X250e-48t Summit X250e-48p
Summit X250e-24x
Summit X350 series:
Summit X350-24t Summit X350-48t
Summit X450 series:
Summit X450-24t Summit X450a-24t Summit X450a-24t-DC Summit X450a-24x
Summit X450-24x Summit X450a-48t Summit X450e-24p Summit X450a-24x-DC
Summit X450e-48p Summit X450a-48tDC