Specifications

2 Enter the URL for your Ridgeline server, in the form:
http://<host>:<port>/
Replace <host> with the name or IP address of the system where the Ridgeline server is running.
Replace <port> with the HTTP port number that you assigned to the Ridgeline web server during
installation.
Note
If you configured your Ridgeline server to use the default web server port 80, you do not
need to include the port number. However, the port used by Ridgeline is 8080 by default,
so in most cases you do need to include the port.
The Ridgeline Welcome page appears (see the following figure).
Figure 33: Ridgeline Welcome Page
3 Click Log onto Ridgeline.
4 Ridgeline checks if your system is running the correct version of the Java plug-in. If you are not
running the correct version, you are directed to a page where you can download the correct
version.
If you are running the correct version of the Java plug-in, the Ridgeline client software is
downloaded from the Ridgeline server and installed on the local system.
Starting the Ridgeline 4.0 Client
Ridgeline Installation and Upgrade Guide 45