Specifications
7 Click Next. The Ridgeline 4.0 installation client IP address dialog box appears (see the following
figure).
Figure 14: Ridgeline 4.0 Installation Client IP Address Dialog Box
•
Use this IP address to launch the clients and to talk to the network devices
Select an IP address from the list. The list shows the IP address for each interface on the host.
With this choice Ridgeline uses a single interface to communicate with both network clients and
network devices.
•
Use this host name to launch the clients (Ridgeline will figure out the IP address to use to talk to
the network devices)
The server host name appears. When you choose this option, Ridgeline clients communicate
with the Ridgeline server using the host name, and Ridgeline determines the interface to use
when talking to network devices
•
Use this host name to start the clients and this IP address when talking to network devices
The server host name appears, along with a list to select an IP address. This option only appears
on hosts with multiple network interfaces.
8 Type the HTTP port that clients should use when connecting to Ridgeline in the Ridgeline's HTTP
port box. The Ridgeline default HTTP port is 8080.
Installing the Ridgeline 4.0 Server
Ridgeline Installation and Upgrade Guide 22