User guide

Installing the ReachNXT 100-8t

ReachNXT 100-8t User Guide

Insert the locking device into the Kensington lock slot on the ReachNXT 100-8t rear panel (Figure 4),

then turn it in the locking direction.

Figure 4: Kensington Lock Slot on the ReachNXT 100-8t Rear Panel

4 If the ReachNXT 100-8t will be powered using AC power, connect the unit as follows:

a Connect the optional AC adapter to the power socket on the ReachNXT 100-8t (labeled PWR).

b Select and attach the appropriate plug style to match the AC outlet to which you are connecting

the adapter.

c Plug the AC adapter into a wall outlet.

Using the Magnet Mounting Kit

The optional magnet mounting kit allows you to mount the ReachNXT 100-8t in a fixed location using

magnets attached to the unit. The magnet mounting kit contains the following items:

● Two magnets

● Two rubber stabilizing pads

● Mounting plate

● Screws and anchors

The magnets are attached to two slots on the bottom of the ReachNXT 100-8t unit (Figure 5). At the

other two corners, rubber stabilizing pads prevent the unit from rocking.

Kensington lock slot

RCH_006