User guide

44 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
configure snmp syslocation
configure snmp syslocation <alphanumeric string>
Description
ConÞgures the location of the switch.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
Use this command to indicate the location of the switch.
Changes made by this command are executed immediately and do not require the build command.
Example
The following command conÞgures a switch location name on the system:
configure snmp syslocation "Engineering Lab"
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
alphanumeric string The switch location. A maximum of 255 characters is allowed.