User guide

42 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
configure snmp delete trapreceiver
configure snmp delete trapreceiver <IP address>
Description
Deletes a trap receiver from the trap receiver list.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You can use this command to remove a trap receiver that was added with the configure snmp add
trapreceiver
command.
Changes made by this command are executed immediately and do not require the build command.
Example
The following command removes the trap receiver with IP address 10.101.0.100:
configure snmp delete trapreceiver 10.101.0.100
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
IP address The IP address of the SNMP trap receiver to delete.