User guide

configure snmp delete community
ExtremeWarePx1 1.2 Command Reference Guide 41
configure snmp delete community
configure snmp delete community
[readonly | readwrite]
<alphanumeric string>
Description
Deletes an SNMP read or read/write community string.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You can use this command to remove a community string that was added with the configure snmp add
community
command.
Changes made by this command are executed immediately and do not require the build command.
Example
The following command deletes the read/write community string extreme:
configure snmp delete community readwrite "extreme"
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
readonly Specifies read-only access to the system.
readwrite Specifies read and write access to the system.
alphanumeric string The SNMP community string to be deleted.