User guide

show switch
ExtremeWarePx1 1.2 Command Reference Guide 289
show switch
show switch
Description
Displays the current version of software loaded in primary and secondary ßash, which image and
conÞguration are currently selected, and other useful information.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
This example displays information about the switch.
station2:5 # sh switch
sysName: station2
sysType: px1
sysLocation: not yet configured
sysContact: [e-mail], [phone]
system IP: 10.10.12.10
system netmask: 255.255.255.0
active default gateway: 10.10.12.1
backup default gateway: not yet configured
mgmt IP: 10.10.2.12
mgmt netmask: 255.255.255.0
system MAC (CPU-1000 MAC): 00:01:30:f0:40:00
mgmt MAC (10/100 MAC): 00:01:30:f0:40:02
SLB MAC (SLB-1000 MAC): 00:01:30:f0:40:01
Uptime: 0 days 02Hr 42Min 47sec
Software version: 1.2.3b4
Software image selected: primary
Software image booted: primary
Primary Software version: 1.2.3b4 fpga 606rd
Secondary Software version: 1.1.1b63 FPGA: 564 by build 9/24/02 14:33:02
Configuration selected: primary
Configuration booted: primary
Fan status: all fans are operational
Self Audit status: enabled.
History
This command was available in ExtremeWarePx 1.1.