User guide

258 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show log configuration
show log configuration
Description
Shows the conÞguration for the logging facility.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays logging conÞguration:
SummitPx1:10 # show log configuration
config log display warning
enable syslog
config syslog ip 10.10.10.1
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.