User guide

show log
ExtremeWarePx1 1.2 Command Reference Guide 257
show log
show log {fatal | errors | warning | info}
Description
Displays the current snapshot of the switchÕs internal log.
Syntax Description
Default
N/A.
Usage Guidelines
The switch maintains 200 message in its internal log. You use the show log command to display the
these messages. The option speciÞes the severity level of the messages to be displayed. If no option is
speciÞed, all messages in the internal log are shown.
Example
The following command displays error messages from the log:
show log errors
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
fatal Display fatal messages only.
errors Display messages at the error level and higher (non-fatal and fatal error
messages)
warning Display messages at the warning level and higher (warnings, non-fatal error
messages, and fatal error messages)
info Display messages at the informational level and higher (non-fatal error
messages, and fatal error messages)