User guide

254 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show iparp
show iparp
{<IP address> | <hostname>}
Description
Displays the IP Address Resolution Protocol (ARP) table.
Syntax Description
Default
Show all entries.
Usage Guidelines
Parameter to this command allow you to Þlter the display by IP address or host name.
Displays the IP ARP table, including:
¥ IP address
¥ MAC address
¥ Aging timer value
¥ VLAN name, VLAN ID and port number
¥ Flags
Example
This example displays the entire IP ARP table:
station2:24 # show iparp
Total Received ARP requests: 491
ARP requests matching VIP, PIP and next-hop: 6
ARP requests matching CPU IP address: 0
Tx ARP response count for VIP, PIP and next-hop: 6
ARP response transmit err count: 0
LINK LEVEL ARP TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
10.6.2.1 00:01:30:a2:18:0 405 1 0 fei0
10.6.2.150 00:a0:cc:5a:7f:c0 405 0 816 fei0
10.6.12.1 00:e0:2b:df:0b:0 405 1 487 gig0
----------------------------------------------------------------------------
IP address An IP address to use for filtering the display. Only entries with the specified
IP address are displayed.
hostname A host name to use for filtering the display. Only entries with the specified
host name are displayed.