User guide

show health-check down
ExtremeWarePx1 1.2 Command Reference Guide 251
show health-check down
show health-check down
Description
Shows the servers that failed health check and that are marked down.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
None.
Example
This example shows which servers are down.
SummitPx1:15 # sh health-check down
Healthcheck is currently enabled
default interval 30 sec, retry interval 10 sec, arp interval 5 min
default fail after 2, restore after 2
1722/3026 ping rx/tx
1 checks active
4 DOWN 4 UP 2 *UP 3 *DOWN
flags: E - check Enabled, D - check Disabled, R - mac is resolved
ra - restore after, fa - fail after, left - secs till next check
index IP port proto state check left run ra fa ups flg
1.1.1.1 ICMP DOWN IDLE 1 -2 220RE
100 1.1.1.1 90 ICMP *DOWN IDLE 23 0220RE
101 1.1.1.1 91 ICMP *DOWN IDLE 33 0220RE
10.6.2.1 ICMP DOWN PINGING 16 -2 220E
102 10.6.2.1 900 ICMP *DOWN IDLE 30220E
68 10.6.3.6 53 HTTP DOWN IDLE 01220RE
69 10.6.3.7 53 HTTP DOWN IDLE 01220RE
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.