User guide

show default-gateway

ExtremeWarePx1 1.2 Command Reference Guide 241

show default-gateway

Description

Displays the default gateway IP address for the Gigabit Ethernet interface.

Syntax Description

This command has no parameters or options.

Default

N/A.

Usage Guidelines

None.

Example

This example shows information about the default gateway.

SummitPx1:36 # sh default-gateway

Default Gateway 1: 10.6.12.1

Default Gateway 2: Not configured.

Active Gateway : 10.6.12.1 Mac=[00:e0:2b:df:0b:00] Errs=0, Switches=0

History

This command was available in ExtremeWarePx 1.1.

Platform Availability

This command is available on the Px-series application switch.